Y410/Y410-P/C/P-C_ 胜蓝电气
  • 回主页

  • Product Series
  • 服务热线

    0755-88860059

您当前的位置: 首页> 产品中心> 继电器模块> Y410/Y410-P/C/P-C

产品特点

* Y410/Y410-P模块对应所有端子接线的PLC的输出模块;输入输出均采用单排端子连接;
* Y410-A可拔插4位一组COM设计输出端;
* Y411/Y411-P模块对应所有端子接线的PLC的输出模块;采用单排端子台作输入端,10P MIL
   连接器作输出端;
* Y412/Y412-P采用10位MIL连接器作输入端,单排端子台作输出端,输出段预留两个COM口;
* Y413/Y413-P输入输出端均采用MIL连接插座,方便进行远距离配线连接;

* 采用8位继电器模组,体积减少到最小;采用LED动作显示,各输入输出端状态一目了然;

* Y410/Y410-Pモジュールは全ての端子接線のPLC出力モジュールに対応できます;入力出力も単段端子で連接に採用してい
   ます;
* Y411/Y411-Pモジュールは全ての端子接線のPLC出力モジュールに対応できます;入力出力も単段端子で連接に採用してい
   ます、10PMILコネクタで出力側に使用されています。
* Y412/Y412-Pが10P MIL コネクタを入力側にして、単段端子台は出力側にして、それぞれの感電出力は各COMボートがあり
   ます。
* Y413/Y413-Pの入力出力側もMIL連接コンセントを採用して、遠距離配線の連接に便利です。
* 8点リレーモジュールを採用して、最も省スペース;LED動作表示を採用して、各出力入力側状態ははっきり見えます;
* Y410/Y410-P module is an output module corresponding to all PLC with terminal block connection ; A single-strip 
   terminal connection is used for both the input and output;
* Y411/Y411-P module is an output module corresponding to all PLC with terminal block connection;A single-strip 
   terminal black as the input end and a 10P MIL connector as the output end;
* Y412/Y412-P utilizes a 10P MIL connector as the input end and a single-strip terminal black as the output end, output 
   of electric shock are independent of each COM port
* Y413/Y413-P utilizes MIL connection socket for both the input and output, facilitating remote wiring connection;
* Utilizes an 8 bit relay module for compact design to save space;Utilizes LED display, so all input and output statuses 
   are visible;

关于选型

外形图

copyright 备案号:粤ICP备18138807号 © 深圳胜蓝电气有限公司.