产品特点
*.T062转换板对应KEYENCE系列的KV1000、KV3000、KV5000的CPU模块的连接使用,将CPU的16位输入和8位输出分开,各对应到10位连接器。
*.这款配合本公司T系列其它产品,完全实现高效率省配线的连接,灵活的运用使配线工作更快捷。
*.T062この端子台はKEYENCEシリーズのKV1000,KV3000,KV5000のCPUモジュールの使用に対応します,将CPUの16点入力と8点出力を分けて、MIL10芯コネクタに別対応します.
*.当社のtシリーズのほかの制品に合わせて、高効率省の配备を完全に実施し、円滑な运用を円滑にしている。
*.T062 is applicable to the connection of CPU modules of KEYENCE, including KV-1000, KV-3000,KV-5000,reconfigures the 16 input and 8 outputs of the CPUinto 10 pin connector.
*.When used in combination with other T series products, it can increase the efficiency of wiring work and saves time,flexible wiring to maximize efficiency.
注意事项 / 安装注意 .
-
订购前请确认好PLC引脚定义,选择适合的端子台。
-
和PLC连接时,请勿必使用本公司开发的与之对应的专用电缆线。
-
ご注文の前に、plcの足をチェックして、端子台を選んでください。
-
plcと接続するときは、弊社が开発した対応する専用ケーブルを使用しないで下さい。
-
Before ordering,please confirm the PLC pin definition,choose the suitable terminal.
-
When PLC connection,please be sure to use the company developed and the corr esponding special cable.
-
用2个M4的螺丝可固定在零件安装的地方。建议使用M4X16的螺丝,螺纹孔深3mm以上。
-
可安装在标准35mm的DIN导轨上。
-
2 m4のネジは部品に取り付けられた箇所に固定できる。m4x16のネジを使い、ネジ穴は3mm以上も深さ。
-
標準35mmのdinレールに取り付けられる。
-
Screw Mounting:use M4*16 screw,screw hole depth≥3mm.
-
DIN Rail Mounting:Standard 35mm DIN RAIL.
详细资料